Disclaimer and contact information
About surgical techniques:
Proper surgical procedures and techniques are the responsibility of the medical professional. The guidelines contained herein are furnished for information purposes only. Each surgeon must evaluate the appropriateness of the procedures based on his or her personal medical training and experience. Prior to use of any Merete systems, the surgeon should refer to the product package insert for complete warnings, precautions, indications, contraindications and adverse effects. Package inserts are also available by contacting Merete Technologies, Inc.
About E-IFUs:
If you have any further questions about the sterilization processes after reading our instructions, contact us at 630-869-1091 or service@merete-medical.com.
Merete® Cannulated PCS Screws
The self-drilling and self-tapping Merete® Cannulated PCS Screws are made of titanium alloy (Ti6AI4V, DIN EN ISO 5832-3).
Technical Specifications
- Plate compression screw made from titanium alloy (Ti6Al4V, DIN EN ISO 5832-3)
- Improved self-tapping tip requires reduced insertion torque
- Applicable in conjunction with locking plates
FEATURES
- Self-Drilling and self-tapping
- Cannulated
- K-wire: DIA 1.0 mm
- Sizes: Lengths – 12 mm – 40 mm
- DIA: 3.0 mm
- Driver: 2.5 mm HEX
Indications
- For adult and pediatric patients
- Fixation of fresh fractures
- Revision procedures
- Joint fusion and reconstruction of small bones of the hand, feet, wrist, ankles, fingers and toes
